Cleaning And Maintenance Work On The Underside Of The Appliance; Replacing The Air Filter - Grizzly Tools BRM 5117-2 A 4in1 Set Traduction De La Notice D'utilisation Originale

GB
Cleaning and maintenance
Have any repair and mainte-
nance work not described in
these instructions carried out by
a specialist workshop. Use only
original replacement parts. Risk
of accidents!
Carry out maintenance and
cleaning work strictly with the
engine switched off and spark
plug connectors removed. Risk
of injury!
Allow the equipment to cool
before any maintenance and
cleaning work. Elements of the
engine are hot. Risk of burning!
Wear gloves when handling the
blade.
Cleaning and maintenance
work on the underside of
the appliance:
Place an underlay under the petrol
lawnmower.
Do not tilt the equipment sideways
or forwards. Operating fluids could
leak out and the engine could be
damaged.
Make sure that a second person
holds the device because there is
a danger of tipping backwards.
1. Disconnect the spark plug
connector (
2. Remove the grass collection
box (
3. Unhook the starter handle and
rope (
122
14).
22).
24).
4. Release the quick-release
levers (
handlebar (1).
When folding up, make sure
that the Bowden cables (
do not get caught and jammed.
5. Tilt the device back.
• Always keep the equipment clean. To
clean, use a toothbrush or cloth but no
corrosive cleaning agents or solvents.
Do not use water to clean the engine as
it could contaminate the fuel system.
• To clean the blade housing, it is possi-
ble to connection a hose to the upper
side of the housing (see
• After mowing, remove plant remains
that are stuck to the equipment by us-
ing a piece of wood or plastic. Clean
the vent holes, ejection hole and
blade area especially. Do not use hard
or pointed objects, which could dam-
age the equipment.
• Oil the wheels from time to time.
• Before each use, check the lawn-
mower for obvious defects such as
loose, worn or damaged parts. Check
that all nuts bolts and screws are
sitting firmly.
• Check covers and guards
( 2, 9, 15, 16, 21, 27) for damage
and that they are sitting correctly. Re-
place if necessary.

Replacing the air filter

Do not operate the equipment
without the air filter otherwise dust
and dirt will get into the engine and
result in damage to the machine
Removing the air filter
1. Disconnect the spark plug connector
( 14) (see "Spark plug maintenance").
3) and fold up the
5)
33).