Replacement Parts/Accessories; Fault Correction - Grizzly Tools BRM 5117-2 A 4in1 Set Traduction De La Notice D'utilisation Originale

Replacement parts/accessories

Spare parts and accessories can be obtained at
If you have any other questions, contact the "Service-Center" (see „Service-Center").
Troubleshooting
Problem
Engine does not
start
Engine starts but
equipment does
not run at full
power
Engine splutters,
stops
Engine overheats
Drive does not
switch on
Output unsatis-
factory or engine
labouring
www.grizzlytools.shop
Possible Cause
Too little petrol in the tank
Incorrect starting sequence
Spark plug connector
not put on correctly
Sooted spark plug (
Incorrectly adjusted carburettor
mix
Dirty air filter ( 14)
Incorrectly adjusted carburettor
mix
Incorrectly adjusted carburettor
mix
Sooted spark plug (
Ventilation holes blocked
Incorrect spark plug (
Too little engine oil in the engine
Bowden cables (
justed
Grass too short or too long
Blade blunt
Blade blocked with grass, grass
collection box full, ejection chan-
nel blocked

Fault Correction

Fill with petrol
Follow the instructions for starting the
engine (see "operation")
Attach the spark plug connector
( 14)
Clean, adjust or replace the spark plug
(see "cleaning and maintenance")
32)
Have the carburettor adjusted by a
specialist workshop
Replace the air filter (see "cleaning
and maintenance")
Have the carburettor adjusted by a
specialist workshop
Have the carburettor adjusted by a
specialist workshop
Clean, adjust or replace the spark plugs
32)
(see "cleaning and maintenance")
Clean the ventilation slot
Change the spark plug
32)
Fill with engine oil (see "initial opera-
tion")
Adjust the Bowden cables or have
5) misad-
them adjusted by a specialist work-
shop
Change the cutting height (see "set-
ting the cutting height")
Have the blade sharpened or re-
placed by a specialist workshop
Remove the grass (see "cleaning
and maintenance")
GB
127