Checking The Blade; Adjusting The Carburettor; General Storage Instructions; Storage During Longer Breaks From Operation - Grizzly Tools BRM 5117-2 A 4in1 Set Traduction De La Notice D'utilisation Originale

GB
- Turn the adjusting nut (35)
clockwise:
The Bowden cable lengthens.
3. Tighten the locking nut (34) by
hand.

Checking the blade

Always have a blade that is dama-
ged or unbalanced replaced by a
specialist workshop.
Improper installation can cause
severe injury.
Never tilt the lawnmower to the
side or forwards when the petrol
or oil tank is filled!This could
damage the engi-ne, voiding the
warranty.
Always have a specialist workshop
sharpen a dull blade, as they can
perform imbalance testing.
Wear gloves when handling the
blade.
• Remove the spark plug connector
( 14) and check the blade for wear
and damage.

Adjusting the carburettor

The carburettor has been preset in the
factory for optimum performance. If re-
adjustments are required (see "Trouble-
shooting") have the adjustments made by
a specialist workshop.
124
Storage

General storage instructions

Do not store the equipment with
a full collection box. In hot wea-
ther, the grass begins to ferment
when heat is generated.
Risk of fire.
• Clean and service the equipment be-
fore storage.
• Allow the engine to cool before storing
the equipment in enclosed areas.
• Use suitable and authorised contain-
ers for storing fuel.
• Keep the equipment in a dry place
that is protected from dust and out of
reach of children.
• For space-saving storage, the han-
dle bar can be folded down (see 1-4
„Cleaning and General Maintenance
Work - Cleaning and maintenance
work on the underside of the appli-
ance", )
• Do not enclose the device in nylon
sacks as this may cause moisture or
mould to form.
Storage during longer breaks
from operation
Non-observance of the storage
instructions may cause starting prob-
lems or permanent damage as a re-
sult of fuel residues in the carburettor.
There is no need to drain the petrol
tank if a fuel stabiliser is added to
the petrol.
• To empty the petrol tank, start the motor
in a well-ventilated area and let it run
until it runs out of petrol.