Setting The Cutting Height; Starting And Stopping The Engine - Grizzly Tools BRM 5117-2 A 4in1 Set Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
GB
- Open the filler cap carefully to al-
low excess pressure to escape;
- Do not smoke whilst refuelling;
- Avoid skin contact and inhala-
tion of the fumes;
- Remove spilt petrol;
- Keep petrol away from sparks,
open flames and other ignition
sources;
- Do not use petrol/oil mixtures;
- Use normal or super unleaded
petrol;
If using organic fuel, do not mix
more than 10% ethanol.
- Only use clean, fresh petrol;
- Do not store petrol for longer
than one month, as its quality
deteriorates
Do not fill the tank fully, so that the
petrol has space to expand
1. Unscrew the filler cap (
2. Pour in the petrol to the lower
edge of the filler (31).
3. Close the filler cap.
4. Wipe away petrol residues
around the filler cap.

Setting the cutting height

The equipment has 6 positions for setting
the cutting heigh (25-75 mm):
1. Pull the lever (19) outwards and
push it to the desired position .
2. Push the lever back in.
The correct cutting height is around
25 – 45 mm for an ornamental lawn and
around 40 – 65 mm for a utility lawn.
120
Select a greater cutting height for
the first cut of the season.
Operation
Some level of noise emission with
this equipment is unavoidable.
Postpone noisy work until desig-
nated periods when it is permitted.
Take rest periods when needed and
limit working time to the minimum
necessary. For your personal pro-
tection and the protection of people
working nearby a suitable form of
hearing protection must be worn.
Warning! Petrol is flammable.
Start the engine at least 3 m
away from the filling location.
Start the equipment on a sturdy,
level base, if possible not in long
grass. Ensure that the cutting tool
8).
is touching neither objects nor the
ground.
For your safety: Stand behind the
device when starting it.
Regularly check petrol and oil level
(see „Initial Operation") and refill in
due time.
Starting and stopping
the engine
1. Press the fuel pump (10) (Primer)
2. Pull the safety catch (2) towards
Cold start:
3 times.
the handle bar (1) and hold it.

Publicité

Table des Matières
loading

Table des Matières