Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
.
English
7.
Do not go backwards and forwards in the
material, rather pull the tool calmly through
it.
8.
Work only at right angles and in straight
lines, to avoid the danger of cracking in
the core or segments breaking off.
9.
Do not exert a strong grinding pressure;
the weight of the electric power tool will
suffice.
10. Do not include any cooling breaks.
11. Caution! The tool insert will become very
hot during the work; only touch it with
safety gloves, after it has cooled down.
SAFETY INSTRUCTIONS FOR HANDLING
SAW BLADES
1.
Only use tool inserts if you are familiar with
their handling.
2.
Do not exceed the maximum rotation
speed. The maximum permissible rotation
speed indicated on the tool insert must
not be exceeded. Remain within the rota-
tion speed range, if indicated.
3.
Do not use cracked tool inserts. Throw
away any cracked tool inserts. Repair is
not permitted.
4.
Clean off any contamination, fat, oil or
water from the clamping surfaces.
5.
Do not use any loose spacers or bushes
to reduce the size of the holes in the circu-
lar saw blades.
6.
Make sure that fixed spacers for securing
the tool inserts have the same diameter
and at least 1/3 of the cutting wheel
diameter.
7.
Make sure that any fixed spacer rings are
parallel to one another.
8.
Handle the tool inserts with care. Prefera-
bly, store these in their original packaging
or in special containers. Wear safety
gloves to improve safe gripping and to
further reduce the risk of injury.
9.
Before using the tool inserts, make sure
that all the safety devices are suitably
fastened.
10. Make sure before use, that the tool insert
you are going to use corresponds to the
technical requirements of this electric
power tool and is suitably fastened.
30
7062244_MaxxSaw_Ma_#1503-19.indb 30
All manuals and user guides at all-guides.com
11. Only use the saw blade provided when
ADDITIONAL SAFETY ADVICE FOR THE
LASER
•
•
•
•
•
•
RESIDUAL RISKS
Even when you use this electric power tool
correctly, residual risks remain. The follow-
ing dangers may arise in connection with
the construction and application of electric
power tools, among other things:
1.
2.
3.
Warning! These electric power tools produce
an electromagnetic field during operation.
Under certain circumstances, this field may
impair the operation of active or passive medi-
cal implants. In order to reduce the danger of
serious or fatal injuries, we recommend that
persons with medical implants consult their
doctor and the manufacturer of the medical
implant before operating the electric power
tool.
INTENDED USE
The Compact Plunge Saw is suitable for saw-
ing straight-line cuts in wood, wood-like mate-
rials and plastics. For these cuts, use either the
carbide tipped saw blade or the HSS saw
working with wood; never use it for work-
ing with metals.
Do not look directly into the laserbeam
Do not point the laserbeam towards per-
sons or animals
Do not point the laserbeam towards
reflecting materials
Do not insert hard objects into the laser
optic
Clean the laser optic with a soft dry brush
Only a qualified technician should be
repairing the laser
Damage to health resulting from hand-arm
vibrations if the electric power tool is used
over a long period of time, or is incorrectly
operated or maintained.
Injuries or damage to property, caused by
flying tool inserts, which unexpectedly spin
out of the electric power tool due to sud-
den damage, wear or incorrect mounting.
Burns and cuts, in cases where the tool
inserts are brought into contact with bare
skin immediately after use.
09-04-15 11:31
Publicité
Table des Matières
