Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.
Service
a.
Please use a qualified expert who uses
original replacement parts to repair
your power tool.
This will ensure proper functioning of the
power tool.
SAFETY INSTRUCTIONS FOR ALL SAWS
Sawing
a.
DANGER: Do not put your
hands in the sawing area or on
the saw blade. Use your second
hand to hold onto the auxiliary
handle or the motor housing. If
both hands are being used to hold the
circular saw, then they cannot be injured
by the saw blade.
b.
Do not grip underneath the workpiece.
The safety guard cannot protect you
against the saw blade under the
workpiece.
c.
Adjust the cutting depth to the thick-
ness of the workpieces. The saw should
protrude by no more than the height of
one tooth under the workpiece.
d. Never hold the workpiece to be sawn in
your hand or over your leg. Secure the
workpiece in a stable holder. It is
important to fasten the workpiece firmly
in order to minimise the danger of con-
tact with the body, jamming of the saw
blade or loss of control.
e.
Grip the electric power tool by the insu-
lated handling surfaces only when you
are carrying out work in situations
where the tool insert may make contact
with hidden power lines or its own
power cable. Contact with a live wire
places a voltage on the metal parts of
the electric power tool and will lead to an
electric shock.
f.
Always use a stop or a straight edge
guide when making longitudinal cuts.
These improve the accuracy of the cut
and reduce the possibility of the saw
blade jamming.
g.
Always use saw blades of the right size
and with matching locating holes (e.g.
star-shaped or round). Saw blades
which are not matched to the mounting
7062244_MaxxSaw_Ma_#1503-19.indb 25
All manuals and user guides at all-guides.com
h.
ADDITIONAL SAFETY INSTRUCTIONS
FOR ALL SAWS
The causes of kickback and how to
avoid them:
•
•
•
A kickback is the result of improper or incor-
rect use of the saw. It can be avoided by taking
suitable precautions, as described below.
a.
b.
pieces of the saw will run eccentrically
and lead to loss of control.
Never attach the saw blade using dam-
aged or incorrect washers or screws.
The saw blade washers and screws are
specially constructed for your saw, to
give optimal performance and operating
safety.
A kickback is a sudden reaction due to
snagging, jamming or misalignment of the
saw blade, which results in the uncon-
trolled saw jumping out of the workpiece
and moving towards the operator.
If the saw blade having snagged or
jammed in a self-closing saw cut, is locked
and the motors power jolts the device
back towards the operator.
If the saw blade is rotated or misaligned in
the saw cut, the teeth on the rear edge of
the blade can become hooked in the
surface of the workpiece, whereby the
saw blade jumps out of the cut and the
saw springs back in the direction of the
operator.
Hold the saw firmly with both hands
and place your arms in such a position
that you can absorb the force of a kick-
back. Always keep yourself to one side
of the saw blade and never bring the
blade in line with your body. In the event
of a kickback, the circular saw may
spring backwards; however, the operator
can control the kickback force if suitable
measures have been taken.
If the saw blade becomes jammed or if
you interrupt the work, switch the saw
off and keep it held gently in the mate-
rial until the saw blade has come to
rest. Never attempt to extract the saw
from the workpiece or to pull it back-
wards while the saw blade is moving;
otherwise a kickback may occur. Find
.
English
25
09-04-15 11:31
Publicité
Table des Matières
