Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONNECTING RODS FOR GUIDE RAILS
1.
To connect both guide rails slide the first
connecting rod from the bottom into the
groove of the guide rail.
2.
Slide the other connecting rod into the
second groove.
3.
Use the 3 mm Allen key to tighten the stud
screws to the limit stop to connect the
rails.
THE PARALLEL GUIDE
To cut parallel to a wood edge, you can use
the enclosed parallel guide (22).
1.
In order to fix the parallel guide (22), loosen
the clamping knob (10) slightly.
Using the centimetre scale on the parallel stop,
you can adjust the distance between the stop
bar and the saw blade.
2.
Secure the parallel guide by tightening the
clamping knob (10).
When not using the parallel guide, tighten the
clamping knob (10) securely. The clamping
knob can be unscrewed and fall off due to the
vibration of sawing.
DETERMINE CUTTING LINE
When using the saw with guide rail always
align cutting line (9) at the front and back of the
base plate with your marked cutting line for
straight cuts.
SAW BLADES
•
Use only saw blades with diameters in
accordance with the requirements on the
saw.
•
Use only recommended saw blades.
7062432-THOR-1000W-Ma-#-1605-17.indb 25
MM (Multi Material)
External diameter: Ø 125 mm
Bore diameter: Ø 10 mm
Strength: 1.4 mm
Number of teeth/segment: 24
Max. permissible rotation speed: 7000 min
Application: Saw work
Material: wood, steel, non-ferro, laminate,
plastic etc.
TCT
External diameter: Ø 125 mm
Bore diameter: Ø 10 mm
Strength: 1.2 mm
Number of teeth/segment: 24
Max. permissible rotation speed: 7000 min
Application: Saw work
Material: wood
Diamond
External diameter: Ø 125 mm
Bore diameter: Ø 10 mm
Strength: 2 mm
Number of segments: 9
Max. permissible rotation speed: 7000 min
Application: Cutting
Material: tiles, marble, granite, concrete
The segments must have a negative rake angle
and the size of the gap between the segments
must not exceed 10 mm. The maximum disc
thickness is 2 mm.
EXTRACTION OF DUST AND SPLINTERS
Attention! When working with items coated in
leadcontaining paint, for example, or with
some types of wood, harmful or poisonous
dust particles may be generated. This presents
a danger both for the user and for other people
nearby. Protect yourself with suitable personal
safety clothing and equipment and keep other
people away from the working area. Connect
an extraction system or a vacuum cleaner to
the electric power tool. This will provide you
with optimum extraction of dust and splinters
from the workpiece.
Advantages: You preserve both the electric
power tool and your health. Moreover, you're
working area remains clean and safe.
1.
Connect the suction hose (23) to the dust
extraction connection (11).
2.
Attach a suitable dust extraction device.
.
English
-1
-1
-1
25
26-05-16 11:31
Publicité
Table des Matières
