Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DEAR CUSTOMERS
Instruction manuals provide valuable hints
for using your new device. They enable you
to use all functions, and they help you avoid
misunderstandings and prevent damage.
Please take the time to read this manual
carefully and keep it for future reference.
Intended for household and similar purposes.
WARNING – To reduce the risk of injury during
operation, read the instructions.
EXPLANATION OF THE SYMBOLS
Denotes risk of personal injury, loss
of life or damage to the tool in case
of non-observance of the
instructions in this manual.
Risk of electric shock.
Immediately remove the mains plug
from the mains if the mains cable
becomes damaged and during
cleaning and maintenance.
Always wear hearing protection. The
effects of noise can cause hearing
loss.
Wear a dust mask. When working
with wood and other materials,
harmful dust may be generated.
Work with asbestos containing
materials is not permitted!
Wear safety glasses. When working
with electric power tools, sparks,
splinters, chips and dust particles
may be generated and these can
cause loss of sight.
Electric power tool, protection class
II. This sign symbolises that this unit
corresponds to Protection Class II.
This means that the unit is equipped
with either reinforced or double
insulation between the mains circuit
and output voltage or metal housing
respectively.
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the
manufacturer confirms that this
7062477-THOR-800W-Ma-1712-07.indb 17
Electric tool complies with the
applicable European directives.
Do not dispose of electric power
tools with domestic refuse.
GENERAL SAFETY INSTRUCTIONS FOR
POWER TOOLS
WARNING! Read all instructions.
WARNING: Always switch off the
appliance when non-working.
WARNING: Always remove the plug from the
socket when not using the device or during
maintenance of the device .
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
The term "power tool" in all of the warnings
listed below refers to your mains operated
(corded) power tool or battery operated (cord-
less) power tool.
Save these instructions for future
reference!
1.
Work area
a.
Keep work area clean and well lit. Clut-
tered and dark areas invite accidents.
b.
Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gasses or dust.
Power tools create sparks which may
ignite the dust of fumes.
c.
Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
2.
Electrical safety
a.
Power tool plugs must match the out-
let. Never modify the plug in any way.
Do not use any adapter plugs which
earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b.
Avoid body contact with earthed or
grounded surfaces such as pipes, radi-
ators, ranges and refrigerators. There is
an increased risk of electric shock if your
body is earthed or grounded.
c.
Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
.
English
17
22-03-18 11:27
Publicité
Table des Matières
