Description (Fig. A); Initial Use - Princess 132500 Mode D'emploi

Congratulations!
You have purchased a Princess product.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this product
for many years.

Description (fig. A)

Your 132500 Princess cupcake maker has been
designed for making cupcakes. The appliance
can make 7 cupcakes at the same time.
The appliance is equipped with baking plates
with a non-stick coating. The appliance is
suitable for indoor use only. The appliance is
suitable for domestic use only.
1. Power indicator
2. Temperature indicator
3. Baking plate
4. Cupcake holder
5. Lid
6. Lid latch

Initial use

Before you proceed, we need you to pay
attention to the following notes:
- Make sure that there is sufficient space
around the appliance to allow heat to
escape and provide sufficient ventilation.
• Clean the appliance. Refer to the section
"Cleaning and maintenance".
• Place the appliance on a stable and flat
surface.
• Apply a few drops of oil to the baking plates.
• Insert the mains plug into the wall socket.
The power indicator comes on.
The temperature indicator comes on.
The appliance starts heating.
• After use, remove the mains plug from the
wall socket and allow the appliance to cool
down completely.
Note: If you switch on the appliance for the
first time, the appliance may emit a little
smoke and a characteristic smell for a short
period. This is normal operation.
Use (fig. A & B)
Before you proceed, we need you to pay
attention to the following notes:
- Before assembly or disassembly, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
- Use oven gloves to remove the food from
the appliance.
- Do not let metal cutlery touch the baking
plates to prevent damage to the non-stick
coating.
• Prepare the cupcake mixture.
• Place the appliance on a stable and flat
surface.
• If necessary, clean the baking plates (3)
with a damp cloth.
• Close the lid (5). Make sure that the lid
latch (6) locks into place.
• To switch on the appliance, insert the
mains plug into the wall socket. The power
indicator (1) comes on. The temperature
indicator (2) comes on. The appliance starts
heating.
• The temperature indicator (2) goes off
when the heating elements have reached
the required temperature. The appliance is
ready for use.
• Release the lid latch (6) and open the lid (5).
• Carefully pour the cupcake mixture into
the cupcake holders (4) (fig. B).
• Close the lid (5). Make sure that the lid
latch (6) locks into place.
• Bake the cupcakes until they are ready for
consumption. The required baking time
depends on your wishes. Experiment with
the required baking time to achieve the
best results.
• Stay close to the appliance in order to check
from time to time whether the cupcakes
are ready and to make sure that the
cupcakes do not burn.
• Release the lid latch (6) and open the lid
(5) when the cupcakes are ready for
consumption.
• Remove the cupcakes from the cupcake
holders (4).
• Close the lid (5) to retain the heat for
further use. Make sure that the lid latch (6)
locks into place.
9