Télécharger Imprimer la page

Novoferm NOVOPORTA PREMIO T30 Instructions De Montage page 30

Publicité

The fully installed door in 13 steps
Sample fixation procedures for a single-leaf or double-leaf NovoPorta Premio door
For installation details and full description of individual assembly steps see
page 51 following.
Step 1
Step 2
GB
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
30 | Novoferm
Check the door frames and dimensions of gross
construction openings and insert underlying mate-
rial between the masonry anchors and the wall.
Screw the frame together where it is not welded.
Fix mounting plate or adapter onto the holding
element on the frame. Position the frame in the
opening and adjust appropriately.
Adjust the frame vertically and horizontally to the
guide marking and fix it in place. Apply the drip
moulding, if necessary, see page 127.
Drill the holes for the wall plugs, insert approved
wall plugs and fasten the frame using the screws
provided.
Where a frame is being used without a floor recess,
it can be trimmed at the bottom.
Backfill the frame (with two-piece closed frame
2140B, the counterframe does not need to be
backfilled).
Hang the door leaf and adjust it.
Adjust hinges for accurate position.
Position thick rebate cover. Insert sealing profiled.
Fasten on handle and handle fittings.
Where applicable, assemble door closer.
For double-leaf doors only:
Assemble door sequence selector.
Finally, make functional check for
– automatic closing
– closing force
– correct position of the closer seal on three sides
in the frame and in the door leaf
– floor sealing
– lubrication of the lock latches
Please keep these assembly, operating and maintenance instructions as long as you use the product!
Assembly instructions
Installation of the frame
A twisting of the frame uprights during in-
stallation, particularly in the case of corner
frames, is not permitted for functional
reasons!
Page 51
Installation
procedure
for various
– frames
– walls
– installation
methods
from page 52
Backfills
from page 112
from page 54
Cable installation
When installing cables / conduits in corner
frames with counterframes (e. g. 2140B),
ensure that the cables installed there are
not damaged by the frame fixation screws
in the seal groove.
Page 128
Page 130
CORRECT
Page 131
CORRECT
WRONG
WRONG
WRONG

Publicité

loading

Ce manuel est également adapté pour:

Novoporta premio t90Novoporta premio mzNovoporta premio e-s