Technical Data; Intended Use; Functional Description - Festool CMS-GE Guide D'utilisation

California) to cause cancer, birth defects or other
reproductive harm. Some examples of these chemi-
cals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
The risk from these exposures varies, depending
on how often you do this type of work.
To reduce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
proved safety equipment, such
as dust masks that are specially

Technical data

Shaper CMS-OF
Weight without foldaway
legs:
Weight of foldaway legs:
Weigth of router module
Bench dimensions
Bench height with
foldaway legs
Bench height without
foldaway legs
Max. routing tool diameter
Max. routing tool height
Workpiece dimension,
max. L x W x H
8
7.1 kg (15.6 lbs)
3.9 kg (8.6 lbs)
4.6 kg (10.3 lbs)
585 x 400 mm
(23 in. x 15.7 in)
900 mm (35.4 in.)
316 mm (12.4 in.)
60 mm (2.36 in.)
60 mm (2.36 in.)
650 mm x 160 mm
x 65 mm
(25.6 in. x 6.3 in. x
2.5 in.)
designed to fi lter out microscopic
particles.
WARNING
To reduce the risk of injury, user must read in-
struction manual.
Residual risks
In spite of compliance with all relevant design
regulations, dangers may still present themselves
when the machine is operated, e.g.:
- workpiece parts being thrown off;
- parts of damaged tools being thrown off;
- noise emissions and
- dust emissions.

Intended use

The shaper CMS-OF was designed for Festool rout-
ers OF 1010 and OF 1400, but NOT for router OF
2000 and OF 2200. The Festool routers listed above
can be used for stationary applications when com-
bined with the router module and the basic unit
CMS-GE.
WARNING
Only the CMS-OF and the routers OF 1400 and OF
1010 offered by Festool may be installed.
The installation of other power tools makes the
shaper unsafe and increases the hazard for the
user.
WARNING
The user is liable for any damage or accidents
resulting from use not in accordance with the
intended use.

Functional Description

The pictures for the functional description are on
the fold-out page at the beginning of the instruc-
tion manual. When reading of the manual you can
fold out this page for having always an overview of
the machine.
Router module CMS-OF
[1-1] curved guard