Setting Up - Festool CMS-GE Guide D'utilisation

[1-2] press down fi xure
[1-3] fence
[1-4] height adjustment
[1-5] router module CMS-OF
Basic unit CMS-GE
[1-6] switch-/socket-unit
[1-7] fold-out legs
WARNING
Risk of accident, electric shock
Always pull the plug out of the socket before
performing any type of work on the machine.
Ensure that the fl oor around the machine is
level, in good condition and free of loose objects
(e.g. chips and offcuts).
Installing the basic unit CMS-GE
The CMS-GE can be set up with or without the legs
folded out (Fig. 2 and 3).
To fold out the legs, open the four rotary knobs [2-1]
as far as they will go. After folding out the legs, re-
tighten the four rotary knobs.

Setting up

So that the machine stands securely, the length of
one of the legs can be changed by turning the cap
on the end [3-4].
2-1
When collapsing the base, fold up pair of legs [3-2]
fi rst and then the second pair of legs [3-3].
If you use the machine without apart-folded legs,
you have to fi x it properly with the four adjustments
on the work plate.
Slide the plug [4-1] into the recess.
3-1
3-2
3-3
3-4
4-1
4-2
9