Operation; Accessories, Tools; Servicing And Maintenance; Disposal - Festool CMS-GE Guide D'utilisation

WARNING
Risk of injury
Before adjusting the settings on the router
(speed, cutting depth, tool change, etc.), refer
to the specifi cations in the instruction manual
accompanying your router.

Operation

WARNING
Risk of accident - before starting work, make
sure
that any adjustments are made correctly;
the fence with the press-down fi xture or the
curved guard is set correctly;
all screws and rotary knobs are screwed in
tightly.
Observe the following instructions when rout-
ing:
Always work with care. Read all safety instruc-
tions for the router, basic unit CMS-GE and
router module CMS-OF.
Select a cutting depth and feed speed that will
not overload the router.
Always guide in the workpiece at a steady rate
of advance.
Always work in a counter direction (direction
of advance against the rotation direction of the
routing tool).
Always guide the workpiece with both hands.
Use a workpiece holder when machining narrow
workpieces.

Accessories, tools

WARNING
For safety reasons, only use original Festool ac-
cessories and tools!
Festool offers you a comprehensive range of ac-
cessories for your router:
• Routing tools for different applications.
• Guide rails for straight routing.
• Runner bases for different applications.
18
Router
The accessory and tool order number can be found
in the Festool catalogue or on the Internet under
www.festoolusa.com.

Servicing and maintenance

WARNING
Risk of accident, electric shock
Any maintenance or repair work that requires
opening of the motor or gear housing should
only be carried out by an authorised Cus-
tomer Service Centre (name supplied by your
dealer)!
Maintenance or repair work carried out by an
unauthorised person can lead to the wrong
connection of the power leads or other com-
ponents, which in turn can lead to accidents
with serious consequences.
WARNING
Risk of accident, electric shock
To prevent accidents, always remove the plug
from the power supply socket before carrying
out any maintenance or repair work on the
machine!
Do not use compressed air to clean the elec-
trical tool!
Do not try to clean parts inside the machine
in this way, as you could let foreign objects in
through the openings of the machine hous-
ing.
CAUTION
Certain cleaning agents and solvents are harmful
to plastic parts.
Some of these are: gasoline, carbonyl chlo-
ride, cleaning solutions containing chlorine,
ammonia and household cleaners containing
ammonia.

Disposal

Do not throw the power tool in your household
waste! Dispose of machines, accessories and pack-
aging at an environmentally responsible recycling
centre. Observe the valid national regulations.