Original Operating Manual 1 Symbols; Items Included; Technical Data; Intended Use - Festool CMS-TS 75 Notice D'utilisation D'origine

Original operating manual
1 Symbols ................................................
2 Items included ......................................
3 Technical data.......................................
4 Intended use .........................................
5 Safety instructions................................
6 Assembly ..............................................
7 Power supply and start-up ...................
8 Settings.................................................
9 Working with the machine....................
10 Service and maintenance .....................
11 Environment .........................................
12 EU Declaration of Conformity ..............
The specified illustrations appear at the beginning
of the Operating Instructions.
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
2

Items included

[1-1] Retaining panel for portable circular saws
[1-2] Clip for protective cover mounting bracket
[1-3] Protective cover
[1-4] Protective cover bracket
[1-5] Preset profile setting rail
[1-6] Cutting depth adjuster
[1-7] Scales/rulers
[1-8] Push stick
3

Technical data

Module mounting / retaining
panel
Inclination
Cutting depth at 0°
Cutting depth at 45°
Weight
4

Intended use

The following Festool plunge-cut saws can be in-
stalled in the CMS-TS 75 retaining panel:
- TS 75 EBQ, TS 75 EQ
All manuals and user guides at all-guides.com
11
11
11
11
11
12
13
13
14
14
14
14
CMS-TS 75
0° to 47°
0 - 70 mm
0 - 48 mm
3,3 kg
The installation of other portable circular saws is
not possible and therefore not permitted.
Fit one of the above-mentioned portable circular
saws to the retaining panel and install it in the
CMS-GE to form a mobile bench-mounted circular
saw.
Circular saws are intended to be used for sawing
wood, materials similar to wood, plaster and ce-
ment-bonded fibre materials and plastics. When
fitted with special saw blades for aluminium of-
fered by Festool, these machines can also be used
for sawing aluminium.
WARNING
The user will be liable for damage due to improp-
er use.
5 Safety instructions
5.1

General safety instructions

WARNING Read all safety warnings and all
instructions provided with the working
stand and the power tool to be mounted. Failure to
follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
- Keep all of the attached documents and pass on
the documentation if the machine changes own-
ership.
- Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments or changing accesso-
ries. Accidental starting of the power tool is a
cause of some accidents.
- Properly assemble the working stand before
mounting the tool. Proper assembly is important
to prevent risk of collapse.
- Securely fasten the power tool to the working
stand before use. Power tool shifting on the
working stand can cause loss of control.
- Place the working stand on a solid, flat and level
surface. When the working stand can shift or
rock, the power tool or workpiece cannot be
steadily and safely controlled.
- Do not overload the working stand or use as lad-
der or scaffolding. Overloading or standing on
the working stand causes the stand to be "top-
heavy" and likely to tip over.
CMS-TS 75 GB
11