Rizzoli S 60 CF Manuel D'utilisation page 58

Picture 14 - Mobile elements of the door 1) Handle fixing screw 2) Hinge pivots 3) Cap fixing screws
Picture 15 - Correct position of the hinge
4) Move the hinges fixed to the structure us-
ing the star screwdriver to remove and put
again the fixing screws. Pay attention to
place the hinges in the correct way (picture
15);
5) Modify the door moving the handle, to do
this unscrew the bolt which sustain it on the
side using the hex key; Pay attention to the
right sequence and position of the rounded
2.10 INTERNAL WALLING
The refractory mortar used for the internal
walling contain always a little moisture that
is eliminated after the first periods of use: so
it is normal that the first times you light the
cooker a little condensation is being gener-
2
3
2
Picture 16 - Correct position of the rounded washer
washers (picture 16).
6) Move also the cap of the hole in the han-
dle, to do this use the tubular box wrench to
remove the two nuts screwed from the inter-
nal part of the door.
7) Put again the door on the cooker inserting
the thorns and then fix again the enclosure
springs in the lower part of the door;
8) Reinsert the wood box.
ated. For the same reason the internal refrac-
tory bricks experience a bedding that may
generate small holes on the bricks, such holes
do not preclude anyway the working of the
cooker.
56
1