Table des Matières
Publicité
Variable Aspect Ratio
The Variable Aspect Ratio block performs the functions of the ADJ menu in the Teranex
LCD menu. Ranges for these numeric values are defined by the current output video format.
Horizontal values are expressed in pixels; vertical values are in lines.
The Variable Aspect Ratio commands ending in "left" will affect the conventional 2D outputs
of the Teranex AV, Teranex Express, Teranex 2D and Teranex 3D, while the "right" commands
perform no operation. When these commands are used in a Teranex 3D set to 3DModeConvert
or 3DMode2Dto3D, the "left" commands will affect the Left Eye output, while the "right"
commands will affect the Right Eye output.
Command
Variable Aspect Ratio size X left:
Variable Aspect Ratio size X right:
Variable Aspect Ratio size Y left:
Variable Aspect Ratio size Y right:
Variable Aspect Ratio pos X left:
Variable Aspect Ratio pos X right:
Variable Aspect Ratio pos Y left:
Variable Aspect Ratio pos Y right:
Variable Aspect Ratio trim X left:
Variable Aspect Ratio trim X right:
Variable Aspect Ratio trim Y left:
Variable Aspect Ratio trim Y right:
Variable Aspect Ratio zoom/crop:
Command Description
Adjust horizontal image size. Negative values decrease size;
positive values enlarge the image. Default = 0
Adjust horizontal image size of the Teranex 3D right eye
output. Negative values decrease size; positive values
enlarge the image. Default = 0
Adjust vertical image size. Negative values decrease size;
positive values enlarge the image. Default = 0
Adjust vertical image size of the Teranex 3D right eye output.
Negative values decrease size; positive values enlarge the
image. Default = 0
Adjust horizontal position of the image. Negative values
move the image to the left; positive values, to the right.
Default = 0
Adjust horizontal position of the Teranex 3D right eye output.
Negative values move the image to the left; positive values,
to the right. Default = 0
Adjust vertical position of the image. Negative values move
the image upward; positive values, downward. Default = 0
Adjust vertical position of the Teranex 3D right eye output.
Negative values move the image upward; positive values,
downward. Default = 0
Trim the sides of the image. Default = 0
Trim the sides of the Teranex 3D right eye output. Default = 0
Trim the top and bottom of the image. Default = 0
Trim the top and bottom of the Teranex 3D right eye output.
Default = 0
Enables Zoom/Crop. False=OFF; True=ON (Default = False)
Informations pour les développeurs
339
339
Publicité
Table des Matières
