Table des Matières
Publicité
Command
3D toeIn left:
3D toeIn right:
3D flip left:
3D flip right:
Network Config
Command
Friendly name:
DHCP enabled:
IP address:
Gateway:
Subnet:
Noise Reduction
Command
Enabled:
Bias:
Split screen:
Red overlay:
Ping
Determine if the Teranex Server is responding.
Command Description
Adjust the Left Eye Y axis image toe-in.
Range is -40 to +40 units. (Default = 0)
5 units = 1 degree. (1 unit = 0.2 degree)
Adjust the Right Eye Y axis image toe-in.
Range is -40 to +40 units. (Default = 0)
5 units = 1 degree. (1 unit = 0.2 degree)
Flip the Left Eye image. Values are:
Off, Horizontal, Vertical, Both
Flip the Right Eye image. Values are:
Off, Horizontal, Vertical, Both
Command Description
Displays the current user-defined name assigned
to the device. Command is used to assign a new
name to the device.
Although not advised, user may enable/disable
DHCP. True = enabled; False = disabled
Displays current IP address as an integer.
Cannot be changed by the user.
Displays current gateway as an integer.
Cannot be changed by the user.
Displays current subnet mask as an integer.
Cannot be changed by the user.
Command Description
Enable Noise Reduction. False = OFF; True = ON
Adjust the Bias level. Range is -3 to +3
Enable NR before/after split screen. False = OFF; True = ON
Enable NR Red Overlay. False = OFF; True = ON
Informations pour les développeurs
337
337
Publicité
Table des Matières
