Table des Matières
Publicité
AudioInLevel10:
AudioInLevel11:
AudioInLevel12:
AudioInLevel13:
AudioInLevel14:
AudioInLevel15:
Enter the value as a whole number of gain in dB times 10 (e.g. For +4dB, enter a value of 40).
Range is -32dB (-320) to +16dB (160). Default =0.
Output Mapping
You may choose any active audio input channel, Dolby-decoded channel, test tone or mute to be
mapped to each discrete audio output channel or Dolby-encoded output channel. Dolby encoding
and decoding require optional Dolby modules, which can be installed in the Teranex 3D only.
Available source values are:
Inputs:
Dolby decoded inputs:
Test tones:
Please note: AudioOut0: refers to output channel 1, AudioOut1: refers to output channel 2, etc.
Command
AudioOut0:
AudioOut1:
AudioOut2:
AudioOut3:
AudioOut4:
AudioOut5:
AudioOut6:
AudioOut7:
AudioOut8:
AudioOut9:
AudioOut10:
AudioOut11:
Set audio level (gain) for Channel 11
Set audio level (gain) for Channel 12
Set audio level (gain) for Channel 13
Set audio level (gain) for Channel 14
Set audio level (gain) for Channel 15
Set audio level (gain) for Channel 16
AudioIn1 through AudioIn16
AudioDD1 through AudioDD8
TT750 (750kHz), TT1500 (1.5 kHz), TT3000 (3kHz), TT6000
(6kHz), TTMute
Command Description
Select source to be mapped to output Ch 1.
Select source to be mapped to output Ch 2.
Select source to be mapped to output Ch 3.
Select source to be mapped to output Ch 4.
Select source to be mapped to output Ch 5.
Select source to be mapped to output Ch 6.
Select source to be mapped to output Ch 7.
Select source to be mapped to output Ch 8.
Select source to be mapped to output Ch 9.
Select source to be mapped to output Ch 10.
Select source to be mapped to output Ch 11.
Select source to be mapped to output Ch 12.
Informations pour les développeurs
333
333
Publicité
Table des Matières
