Table des Matières
Publicité
Command
CC service1 language:
CC service2 language:
Timecode
Timecode mode:
Timecode input line:
Timecode output line:
Timecode drop frame mode:
Timecode source:
Timecode generate value:
Timecode jam sync value:
Timecode start source:
Video Indexing
Index reaction:
AFD insert type:
AFD output line:
Command Description
Service 1 Language selection. Values are:
English (default), French, German, Italian, Spanish
Service 2 Language selection. Values are:
English (default), French, German, Italian, Spanish
Select the mode of the timecode generator. Values are:
Off, Input, InputRegen, Generate, JamSync
Set the line on which the input timecode is located. The valid
range of values is format dependent. To set the unit to the
default automatic input detection mode, enter 0.
NTSC: lines 10-20
PAL: lines 6-22
1080 HD: lines 9-20
720 HD: lines 9-25
Set the line on which the output timecode is located. The
valid range of values is format dependent. To set the unit to
the default output line, enter 0.
NTSC: lines 10-20 (Default = 14)
PAL: lines 6-22 (Default = 19)
1080 HD: lines 9-20 (Default = 9)
720 HD: lines 9-25 (Default = 9)
Change the drop frame mode in valid output formats.
Values are: DF, NDF.
This command is only needed for the Teranex 3D.
Values are: VITC, LTC.
Set the start time of the output timecode generator,
expressed as HH:MM:SS:FF
Set the search value for the Jam Sync generator, expressed
as HH:MM:SS:FF
Set the source of the timecode number used by the
generator. Values are: Input, User (where "User" is equivalent
to "Start Value" in the LCD Menu tree).
Values are: On, Off (Default = Off)
Values are: Off, Auto, Bypass, or AFD codes 0000 - 1111. For
details, see the AFD Insertion Menu topic in the
user manual.
Range is format dependent. For details, see the AFD Insert
Line Menu topic in the user manual.
Informations pour les développeurs
331
331
Publicité
Table des Matières
