Table des Matières
Publicité
Command
AudioInPair6:
AudioInPair7:
Metadata Commands for Teranex 3D
Available source values are:
Command
Metadata channel mode:
Metadata lfe select:
Genlock
Command
Type:
Line offset:
Pixel offset:
Signal locked:
MODE3D
The MODE3D commands are available in the Teranex 3D only. See the "3D Menu Settings"
section of this user manual for details.
Example:
MODE3D:↵
3D MODE: 3DModeAlign↵
↵
ACK↵
↵
MODE3D:↵
3D mode: 3DModeAlign↵
3D roll left: 0↵
...
↵
ALIGN:↵
Align size X left: 0.000000↵
Align size X right: 0.000000↵
...
↵
Command Description
Select source to be mapped to input pair 7
Select source to be mapped to input pair 8
Command Description
Values are: 32 (3/2 (L,C,R,Ls,Rs)), 20 (2/0 (L/R))
Enables LFE. False=OFF; True=ON
Command Description
Select the Genlock (Reference) of the device.
Values are: Input, External.
Set line timing adjustment for external genlock.
Values are within the range set by the current output video
format. (Default = 1)
Set pixel timing adjustment for external genlock. Values are
within the range set by the current output video format.
(Default = 0)
Provides the status of the external reference lock.
The value reported by the device is either True, where
device is locked to the external reference signal, or False,
where it is not. Cannot be changed by the user.
Informations pour les développeurs
335
335
Publicité
Table des Matières
