Rothenberger ROWELD ROFUSE Print+ V2 Instructions D'utilisation page 20

Contens
1 Introduction
2 Safety Instructions
2.1 Using the Correct Connection Terminal
2.2 Improper Use of the Welding and Power Supply Cables
2.3 Securing the Fitting and the Joint
2.4 Cleaning the Product
2.5 Opening the Unit
2.6 Extension Cables on the Worksite
2.7 Checking the Product for Damage
2.8 Data Interface Cover Cap
2.9 Power Supply Specifications
2.9.1 Mains Power Supply
2.9.2 Generator Power Supply
3 Service and Repair
3.1 General
3.2 Transport, Storage, Shipment
4 Principles of Operation
5 Check-out and Operation
5.1 Turning the Welding Unit On
5.2 Entering the Welder ID Code
5.3 Connecting the Fitting
5.4 Reading the Fitting Code with a Handheld Scanner
5.5 Direct Welding with the AutoWeld Feature
5.6 Starting the Welding Process
5.7 Welding Process
5.8 End of Welding
5.9 Aborted Welding Process
5.10 Cooling Time
5.11 Returning to the Start of Parameter Input
5.12 Using ViewWeld to Manage Logged Welding Reports, Print Tags,
and Assign Geo-data
6 Additional Information in the Welding Report
6.1 Entering Preformatted and User-defined Traceability Data
6.2 Entering or Changing the Job Number and Joint Number
6.3 Entering or Changing Additional Data
6.4 Entering the Fitting Traceability Code
18 ENGLISH
Page
20
20
20
20
20
20
20
20
21
21
21
21
21
21
21
21
22
22
22
22
23
23
23
24
24
24
24
24
24
24
25
25
25
25
26