Publicité
1.2 Déclaration de conformité
Manufacturer:
Address:
Herewith declares that:
–is in conformity with the provisions of the follow-
ing Directives:
and that:
–the following (parts/clauses of) harmonized
standards, national technical standards and speci-
fications have been used:
EU Notified Body:
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Stand-
ards(s).
Roger Eagle/Regulatory Compliance and New Product Quality
Assurance Manager
P. Mertens/Managing Director
Banner Engineering Belgium BVBA
Park Lane, Culliganlaan 2F
1831 Diegem, Belgium
Banner Engineering Corp.
9714 10th Ave. N.
Minneapolis, MN 55441, USA
SC26-2 Programmable Safety Controller
XS26-2 Programmable Safety Controller
XS2so and XS4so Solid-State Safety Output Modules
XS8si and XS16si Safety Input Modules
XS1ro and XS2ro Safety Relay Modules
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
IEC 61508-Part 1-7: 2010 (SIL 3)
IEC 62061:2005 + AC:2010 + A1:2013 (SIL CL 3)
IEC 61131-2:2007
EN ISO 13849-1:2008 + AC:2009 (Cat. 4/PL e)
EN 61326-3-1:2008
Cert. EG-B No.: 01/205/5392.01/15
Valid until 01/20/2020 (MM/DD/YEAR)
TÜV Rheinland Industrie Service GmbH
www.bannerengineering.com - Tel: 763.544.3164
Contrôleur de sécurité XS/SC26-2
01/20/2015
MM/DD/YEAR
01/20/2015
MM/DD/YEAR
Minneapolis
Place
Diegem
Place
5
Publicité
