Nice AVIO500 Instructions Et Avertissements Pour L'installation Et L'utilisation page 28

2
a b
e
i l
2.3.1 – AVIO500 electromechanical gearmotor
AVIO500 is an electromechanical gearmotor consisting of a 24V direct
current motor. It features a mechanical release mechanism with cord that
allows you to move the door manually in the event of a power failure.
The gearmotor is fixed to the ceiling ith the relative mounting brackets.
The control unit actuates the gearmotor and provides for the control of the
supply of the different components; it features an electronic board with
incorporated radio receiver.
The control unit can actuate the gearmotor with two speeds: "slow" or
"fast".
The three P1, P2 and P3 buttons [B] and the corresponding LEDs are
used to program the control unit.
A numbered terminal block is present for the electrical connections [A].
A LED status signal is present in correspondence with the STOP input.
Hookup to the mains couldn't be easier - simply fit the plug into a mains
socket.
TABLE 1
List of small parts for a AVIO500
M6 self-tapping nuts
M6 x14 screws
6.3x38 tcei screws
4.2x9.5 screws
6x18 screws
R05 washers
Cable membrane
Mechanical stops
c
f
m
3
Q.ty
Pcs 4
Pcs 2
Pcs 4
Pcs 2
Pcs 1
Pcs 2
Pcs 1
Pcs 2
d
g h
n
A
B
English – 3