Nice AVIO500 Instructions Et Avertissements Pour L'installation Et L'utilisation page 27

STEP 2
2.1 - INTENDED USE
AVIO500 is a set of components designed for the automation of sectional
or overhead doors in residential applications.
Any applications other than those described above or in different
conditions from those specified in this manual are forbidden.
AVIO500 operates with electric power. In the event of a power failure, the
gearmotor can be released using a suitable cord in order to move the
door manually.
1
A
2.3 - DESCRIPTION OF EQUIPMENT
AVIO500 can consist of the devices sho n in figure 2; immediately make
sure that they correspond to the contents of the package and verify the
integrity of the devices.
N.B.: to adapt the AVIO500 to local regulations, the contents of the pack-
age may vary; an exact list of the contents is shown on the outside of the
package. Anyhow, please consult the sales manager.
2 – English
PRODUCT DESCRIPTION
2.2 - DESCRIPTION OF AUTOMATION
To clarify a few terms and aspects of a sectional or overhead door auto-
mation system.
In Figure 1 we provide an example of a typical AVIO500 application:
A) FL200 flashing light ith incorporated aerial (optional)
B) Pair of PHR00 photocells (optional)
C) Mechanical stops
D) AVIO500 gearmotor
B
Component and accessory list:
A) 1 AVIO500 electromechanical gearmotor with incorporated control
unit
B) head with pinion
C) carriage and release cord
D) 6 m belt
E) leaf bracket
F) 1 guide, 3 meters long, in 3 section
G) 2 coupling profiles
H) 2 ceiling brackets
I)
Miscellaneous small parts: mechanical stops, fasteners, etc.; see
tables 1, 2, 3 and 4 (*)
L) 2 ECCO5... radio transmitters
M) PHR00 pair of wall-mounted photocells
N) FL200 flasher ith integrated antenna
--------------
*
The screws required for mounting AVIO500 are not supplied as they
depend on the type of material and its thickness.
C
D