Unlocking Datashur Pro With The Admin Pin - iStorage DatAshur PRO2 Manuel D'utilisation

To configure an Admin PIN and unlock the datAshur PRO
Instructions - First Time Use
1. Press and hold down the SHIFT (
for one second
2. Press and hold down both KEY ( ) + 1 buttons
3. Enter New Admin PIN and press the
KEY ( ) button once
4. Re-enter New Admin PIN and press the KEY ( )
button again
Note: Once datAshur PRO
only, during which time the datAshur PRO
immediately (if not connected to a USB port) by pressing and holding down the SHIFT (
or by clicking the 'Safely Remove Hardware/Eject' icon within your operating system when connected to a USB
port.
When the datAshur PRO
Locking datAshur PRO
2
To lock the drive, safely eject the datAshur PRO
to the drive, unplugging the datAshur PRO
4. Unlocking datAshur PRO
To unlock the datAshur PRO
1. Press and hold down the SHIFT (
for one second
2. In Standby State (solid RED
KEY ( ) button once
3. With the GREEN and BLUE
enter the Admin PIN and press the KEY ( ) button
again
#8
2
) button
has been successfully unlocked, the
2
needs to be connected to a powered USB port. It can be locked down
2
is unlocked and connected to a USB port, it will not accept further instructions via the keypad.
2
from your host operating system and unplug from the USB port. If data is being written
2
will result in incomplete data transfer and possible data corruption.
2
2
with the Admin PIN, please follow the simple steps in the table below.
2
) button
LED) press the
LEDs blinking together,
for the first time, please follow the simple steps in the table below.
LED LED State
RED, GREEN
sequence then the
switches to solid
drive is in the Initial Shipment State
LEDs turn to blinking
Blinking
GREEN blink then back to Blinking
BLUE LEDs
BLUE LED rapidly blinks then switches to a solid
LED and finally to a blinking
Admin PIN has been successfully configured and drive
unlocked
GREEN LED will remain blinking for 30 seconds
with the Admin PIN
RED, GREEN
sequence then the
switches to a solid
Standby State
GREEN and
GREEN and
several times and then to a solid
and changing to a blinking
drive has been successfully unlocked as Admin
www.istorage-uk.com
and BLUE LEDs blink once in
GREEN LED blinks twice and finally
RED and GREEN LEDs indicating the
GREEN and solid
GREEN and solid BLUE LEDs switch to a
GREEN
GREEN LED indicating the
) button for a second
and BLUE LEDs blink once in
GREEN LED blinks twice and finally
RED LED indicating the drive is in
BLUE LEDs blink together
BLUE LEDs will alternately blink
BLUE
GREEN LED indicating the
BLUE
and solid
BLUE
LED