Télécharger Imprimer la page

ST BC 25 H Manuel D'utilisation page 169

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 221
PROBLEM
5. If the engine floods
6. The cutting device must
not move when the
engine is running idle.
7. The machine starts to
vibrate abnormally
8. The machine has
struck a foreign body.
If problems persist after having performed the above operations, contact your dealer.
PROBABLE CAUSE
The starter grip has been driven
repeatedly with the choke inserted.
Incorrect adjustment
of fuelling
Damaged or loose parts.
Damaged or loose parts.
Remove the spark plug (Fig. 24) and gently
pull the starter rope hand grip (Fig. 12.l) to
eliminate any excess fuel; then dry the spark
plug electrodes and remount it on the engine.
Contact the authorised service centre.
Stop the machine and disconnect
the spark plug cable (Fig. 12.H).
Inspect for damage.
Check for and tighten any loose parts.
Have all checks, repair work and
replacements carried out by an
Authorised Centre only.
Stop the machine and disconnect
the spark plug cable (Fig. 12.H).
Inspect for damage.
Check for and tighten any loose parts.
Have all checks, repair work and
replacements carried out by an
Authorised Centre only.
EN - 17
SOLUTION

Publicité

loading