Wheelchair Transfer - Invacare I-Lift TM Manuel D'utilisation

Wheelchair Transfer

1171892-B
WARNING!
Risk of Injury
– Before transferring, check that the wheelchair weight
capacity can withstand the patient's weight.
– The wheelchair wheel locks MUST be in a locked
position before lowering the patient into the
wheelchair for transport.
Perform these steps in addition to those in 6.4 Lifting and Transferring
the Patient, page 32 when transferring to or from a wheelchair:
1. Engage the wheel locks of the wheelchair to prevent movement
of the wheelchair.
2. Position the patient over the seat with their back against the
back of the chair.
3. Begin to lower the patient either by opening the control valve
or by pressing the DOWN (ê) button.
4. With one assistant behind the chair and the other operating the
patient lift, the assistant behind the chair will pull back on the
grab handle (on select models) or sides of the sling to seat the
patient well into the back of the chair. This will maintain a good
center of balance and prevent the chair from tipping forward.
Use the straps or handles on the side and the back of
the sling to guide the patient's hips as far back as possible
into the seat for proper positioning.
5. Leave the sling in place.
Remove only if a divided leg sling was used.
Lifting the Patient
35