Maintenance And Cleaning; Wear To The Toothed Wheels En - Abicor Binzel MF1 Mode D'emploi

MF1

9 Maintenance and cleaning

Scheduled maintenance and cleaning are prerequisites for a long service life and trouble-free operation.
DANGER
Risk of injury due to unexpected start-up
The following instructions must be followed during all maintenance, servicing, assembly, disassembly, and repair work:
• Switch off the power source.
• Close off the gas and coolant supply.
• Close the compressed air supply.
• Switch off the entire welding system.
• Disconnect all electrical connections.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
WARNING
Risk of crushing
Hands can be pulled in and crushed by moving wheels.
• Do not reach into moving wheels.
NOTICE
• Maintenance and cleaning work may be carried out only by qualified personnel (in Germany see TRBS 1203).
• Always wear your personal protective equipment when performing maintenance and cleaning work.
9.1 Wear to the toothed wheels
1 Condition ex works
Fig. 9 Wear to the toothed wheels
BAL.0183.0 • 2018-08-08
2 Used but still okay
9 Maintenance and cleaning
3 Used – replacement essential
EN - 15