Setting The Speed; Anti-Clockwise Rotation - Hoyer SKMK 1200 A1 Mode D'emploi

9.7 Setting the speed

Turn the speed controller
speed:
- The speed can be adjusted in 10 incre-
ments:
- Speed 1 - 4: for the mixer attach-
ment 29;
- Speed 1 - 10: for the blade assem-
bly 27.
CAUTION:
The mixer attachment 29 must
only be used with speed settings
1 to 4. On the display 25, a re-
spective indication appears.
When mixing liquids at speed 10, the
blender jug 5 must not contain more
than 1 litre, since otherwise liquid might
be ejected (see "Using the blender jug"
on page 118). For speed settings of less
than 10, the blender jug 5 may only be
filled up to a maximum of 2.2 litres.
- For further notes: see "Functions in an
overview" on page 106.
- The speed set is shown on the dis-
play 25.
VITESSE
- During operation, the speed setting can
be changed.
- The speed cannot be set for the Steam-
ing function.
- If during operation you change the
speed to 0, the device will stop. To con-
tinue working, select a speed and press
the button MARCHE/ARRÊT 17.
- If a temperature has been selected, only
the speed settings 1 - 3 are available.
116 GB
Soft start
In order to avoid that during sudden acceler-
16 to set the
ation of hot food liquid is ejected from the
blender jug 5 or the device starts wobbling,
a soft start is provided for all settings except
for the turbo function:
-

9.8 Anti-clockwise rotation

The anti-clockwise rotation is used for gentle
stirring of food not to be chopped.
-
-
-
• Press SENS INV. 19 to activate the
• Press SENS INV. 19 again to deacti-
Soft start for food temperatures exceed-
ing 60 °C.
By pressing button SENS INV. 19 the
direction of rotation of the blade assem-
bly 27 can be changed in standard op-
eration at any time.
The anti-clockwise rotation can only be
applied at low speed settings 1 to 3.
For programmes MALAXER and
SAISIR, the anti-clockwise rotation is
controlled by the programme.
anti-clockwise rotation.
VITESSE
SENS. INV.
vate the anti-clockwise rotation.
VITESSE