Operating The Buttons - Hoyer SKMK 1200 A1 Mode D'emploi

9.4 Operating the buttons

Illumination/Flashing of
the button(s)
MARCHE/ARRÊT 17 flash-
es.
MARCHE/ARRÊT 17 lights
up.
TURBO 18 lit white.
TURBO 18 lit red.
Program button
(MALAXER 22, CUISS.
VAP. 21, SAISIR 20) lights
up and MARCHE/
ARRÊT 17 flashes.
Program button
(MALAXER 22, CUISS.
VAP. 21, SAISIR 20) lights
up and MARCHE/
ARRÊT 17 lights up.
Program button CUISS.
VAP. 21 flashes and
MARCHE/ARRÊT 17 lights
up.
BALANCE/TARE 23 lights
up.
114 GB
Situation
Settings were performed,
and a cycle can be started.
The cycle is in operation.
Turbo function can be acti-
vated.
The function is blocked (e.g.
because the food tempera-
ture inside the blender jug
exceeds 60 °C).
The programme is selected
but not yet started.
The programme is selected
and started.
The programme is selected
and started. However, the
heat-up time of 10 minutes is
still ongoing.
The scale is activated.
Function of the button
Press the button to start a cy-
cle.
Press the button to stop a cy-
cle.
Keep the button pressed as
long as the function is need-
ed.
The button is blocked.
Press MARCHE/ARRÊT 17
to start the function.
In order to abort the pro-
gramme early, press
MARCHE/ARRÊT 17.
The programme starts auto-
matically.
- The timer 24 can be
used to change the pre-
set time.
- In order to start the pro-
gramme before the
10 minutes expired,
press CUISS. VAP. 21.
In order to set the weight in-
dicator to 0, press
BALANCE/TARE 23.