Disposal; After Sale Service; Spare Parts - SATA 3000 K spray mix Mode D'emploi

Operating instructions SATAjet 3000 K spray mix
Material nozzle A
Nozzle No. Art. No.
5370 150276
6050 17004
Reversing nozzle B
2550 120220
3050 120238
3550 120246
4050 120253

14. Disposal

Dispose of the completely emptied spray gun as a recyclable material.
To avoid damage to the environment, dispose of the spray material and
release agent separately from the spray gun in an appropriate manner.
Comply with local regulations!

15. After Sale Service

Accessories, spare parts and technical support may be obtained from
your SATA dealer.

16. Spare Parts

Art. No. Description
12260 Material strainer 60 msh for SATA material filter
12278 Material strainers 100 msh for SATA material filter
18341 Compression spring for paint needle
27813 Air piston spring
30833 Nozzle cleaning set
74856 SATA material strainer set 200 msh
consisting of 4 strainers 20933, 2 strainer holders
77503 and 1 screw 26393
92759 Air piston service unit
94961 Air micrometer (aif flow control knob)
97824 Air distribution ring
98418 Closing screw
98434 Pre-nozzle
Technical Data
Diame- Angle
ter
0,53 mm 70°
0,60 mm 50°
Technical Data
0,25 mm 20/50°
0,30 mm 20/50°
0,35 mm 20/50°
0,40 mm 20/50°
Width Flow rate
at 70 bar
33 cm 1.28 Nl/min
31 cm 1.59 Nl/min
14/22 cm 0.25 Nl/min
14/22 cm 0.38 Nl/min
14/24 cm 0.50 Nl/min
14/25 cm 0.70 Nl/min
Num-
ber
4 units
4 units
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
3 units
1 ea.
1 ea.
EN
47