SATA 3000 K spray mix Mode D'emploi page 31

Operating instructions SATAjet 3000 K spray mix
3.2. Personal Protection Equipment
Always use approved breathing, hearing and eye protection, suitable pro-
tective gloves, workwear and safety boots when using the spray gun and
during cleaning and maintenance work.
3.3. Use In Explosive Areas
Danger to life from exploding spray gun
When using the spray gun in potentially explosive atmospheres of ex-
zone 0, it is possible for an explosion to occur.
→ Never bring the spray gun into potentially explosive atmospheres of
ex-zone 0.
The spray gun is permitted for use / storage in explosion hazard areas of
ex-zone 1 and 2. The product labelling must be adhered to.
3.4. Safety Instructions
Technical status
■ Never start using the spray gun when damaged or when parts are
missing.
■ If the spray gun is damaged, stop working with it immediately, dis-
connect it from the compressed air supply system and vent the unit
completely.
■ Never make any unauthorised modifications or technical changes to the
spray gun.
■ Every time before using the spray gun, check the unit with all connected
components for any signs of damage and ensure it is fitted firmly; carry
out any necessary repairs.
Materials
■ Processing acidic or alkaline materials is prohibited.
■ The processing of solvents with halogenated hydrocarbons, petrol, ker-
osene, herbicides, pesticides and radioactive substances is prohibited.
Halogenated solvents can result in explosive and corrosive chemical
compounds.
■ The processing of aggressive substances containing sharp, abrasive
pigments is prohibited. This includes for example various kinds of adhe-
sives, contact and dispersion adhesives, chlorinated rubber, materials
resembling plaster and paints filled with coarse fibres.
Warning! Risk of explosion!
EN
31