FUAVE ACC06K02 Livret D'instructions page 32

• Pull the water tank out of the appliance as far as possible (± 15 cm), first
remove the pump in the water tank by turning both balls that hold the
pump in place. Now you can remove the pump. The water tank can now
be removed in its entirety. Empty the water tank and clean it thoroughly.
Pump should also be cleaned once a month or when very dirty or in
case of a malfunction. The pump is in the water reservoir. Then turn
both tabs that hold the pump in place, away. Now you can remove the
pump. Click the filter (the side with the diagonal openings) of the pump
and clean the filter and the space behind this. Refit all the parts in the
original position. Beware: If the pump is not correctly fitted, it could
start to vibrate!
• At the end of the season, store the cleaned and dried heater in the
original packaging if possible. Store it upright in a cool, dry and
dust-free place.
Warning:
！ ！
Never leave water in the water tank or casing for longer than a few
days. Change it/throw it away; rinse the tank and let the air cooler
dry if you are not planning to use it for a while (on ventilation-
position).
PROBLEMS AND SOLUTIONS
The device does not work
• Is the plug properly inserted into the socket?
• Is there power on the outlet?
• Has the ON / OFF button been pressed?
The device has little air displacement.
• The fan function is set to Low
• The dust filter and / or the honeycomb evaporating element are
(partially) blocked (clean the element as described in this booklet).
2 9