FUAVE ACC06K02 Livret D'instructions page 29

Picture control panel
On/Off/Stand-by button
Cooling funtion button
Fan speed button
Low Middle
Timer button
Swivel button
Mode button
Normal wind mode
2 6
Picture remote control
Press this button to switch the air cooler On/Off.
The air cooler will start blowing with the Medium fan
speed.
Press this button to switch the cooling function On/
Off. The water reservoir must be filled in order to use
this function. The corresponding icon on the display
will burn. The pump circulates the water from the
reservoir via the honeycomb evaporation element
where it evaporates partially and provides cooling.
Press this button to set the fan speed: Low, Medium
or High. The corresponding icon on the display will
burn. The device will always start in the Medium fan
speed position.
High
Press this button to set the timer to the number of
hours that the air cooler should operate; adjustable
from 1 to 12 hours. Press once (1x) equals 1
hour, press twice (2x) equals 2 hours, etc. The
display flashes, showing the number of set hours
and subsequently, it will return to the ambient
temperature. The air cooler will stop automatically
after the number of set hours has elapsed.
Press this button to switch the swivelling function
On/Off (left – right). The horizontal slats can be set
manually upwards and downwards.
Press this button to set the MODE function. The
device will always start in Normal Wind mode.
You can set the fan speed manually in the Normal
Wind mode (Low, Medium or High). You can also
switch the cooling function On/Off in this mode.