FUAVE ACC06K02 Livret D'instructions page 31

CLEANING AND MAINTENANCE
Switch off the equipment and remove the plug from the socket before
cleaning or carrying out maintenance work.
• Wipe the outside of the equipment regularly with a dry or slightly
damp cloth. Do not use aggressive soaps, sprays, cleaners or abrasives,
waxes, polishes or chemical solutions! Ensure that the operating panel
does not get wet.
• The device should be cleaned
bi-weekly to prevent odours,
bacteria and lime scale and to
ensure proper operation. To take
out the dust filter, including the
evaporation element (8), remove
both screws at the rear of the
device. Carefully remove the
honeycomb evaporation element
from its holder. (By bending
the holder slightly outwards,
you create room to take out the honeycomb evaporation element
undamaged from its holder.) Carefully clean the dust filter and the
honeycomb evaporation element using a soft brush or under mildly
running water, and let them dry thoroughly. Do not damage or deform
the honeycomb evaporation element. Before you return the entirety
into its place, check whether the drain holes in the synthetic element-
holder are not clogged. If necessary, clear these drain holes. Install all
the components in their original position. Never use the device without
a completely assembled element, otherwise you risk water damage!
2 8