FUAVE ACC06K02 Livret D'instructions page 30

Picture control panel
Natural wind mode
Sleep wind mode
Display on/off button
Warning:
！ ！
Take note of the water level during operation!
Picture remote control
In the Natural Wind mode, the fan speed is
automatically changed every 5 seconds to imitate
a natural wind. In this mode, you can select
Natural Wind Low, Natural Wind Medium or
Natural Wind High using the fan speed button.
The average fan speed depends on selecting
Low, Medium or High.
In this mode, the cooling function can also
be switched on as follows: First switch on the
cooling function and then select the Natural
mode.
In the Sleep Wind mode, the fan speed is
automatically changed to imitate a sleep wind.
In this mode, you can select Sleep Wind Low,
Sleep Wind Medium or Sleep Wind High using
the fan speed button. The average fan speed
depends on selecting Low, Medium or High.
In the Sleep Wind mode, the average fan speed is
lower than the speed in the Natural Wind mode
in connection with the noise level. The cooling
function can also be switched on in this mode as
follows: First activate the cooling function and
then select the Sleep mode.
Press this button to switch the display
illumination On/Off.
2 7