FUAVE ACC06K02 Livret D'instructions page 27

The Fuave ACC06K02 evaporates water with heat that is removed from the
room and sends the cool, humid air back into the room: a process that can
be compared to wind blowing across water.
The Fuave ACC06K02 has the following functions:
- Ventilation (3 power settings)
- Ventilation and cooling (3 power settings)
- Rotation
INSTALLATION AND PREPARATION
• Do not start using the air cooler until:
- all packaging is removed and placed away from children.
- all safety instructions have been observed.
- the air cooler or the plug is NOT plugged into the socket.
• Turn the lock button (9) open and pull the water reservoir roughly 15
cm backwards and fill with clean cold water; Fill the reservoir above the
"MIN"- but below the "MAX" level. Ensure that the plug does not get
wet or fall into the water tank. Never use the cooling function without
sufficient water in the water tank.
• If you require extra cooling, you could add frozen ice packs or ice cubes
in the water reservoir (not included).
• If you wish to use the cool function, ensure there is sufficient water in
the reservoir.
• If you have not used the unit for some time, refresh any remaining water.
• Put the air cooler in the correct position.
• Insert the supplied battery into the remote control. The remote control
operates on a button cell battery CR2025 (3V).
Always unplug the power cord when you pour water in or
out of the tank!
2 4