SKY Agriculture Maxi Drill Notice Originale page 35

Table des Matières

Publicité

Mise en route / Start-up
K
d) Réglage du tasse arrière central (option)
- Allonger le tirant de réglage
2
du sol.
- Régler la hauteur du relevage et la profondeur de travail
des outils avant comme préciser dans les paragraphes
a et b.
- Vérifier l'horizontalité du châssis par rapport au sol
(ajuster la hauteur du relevage si nécessaire) ; mémoriser
cette position du relevage en temps que point bas pour
les demi-tours.
- Raccourcir le tirant
1
contact avec le sol.
- Ajouter un tour complet de tirant
bon rappui du sol entre les roues du tracteur.
- Bloquer l'écrou de 46 du tirant de réglage avec la clef
livrée avec la machine
K
d) Adjusting the central rear packer (optional)
- Extend the adjusting tie rod
2
off the ground.
- Adjust the height of the lifting mechanism and the
working depth of the front toolbars as described in
paragraphs a and b.
- Check that the chassis is horizontal relative to the
ground (adjust the lifting mechanism height if necessa-
ry); save this lifting mechanism position as the low point
for turning round.
- Add a complete turn of the tie-rod
2
the wheels
in contact with the ground.
- Add a complete turn of the tie rod in order to guarantee
that the ground between the tractor wheels is properly
consolidated.
- Tighten the 46 mm nut on the adjusting rod
spanner supplied with the machine.
1
afin de décoller les roues
afin de mettre les roues
2
en
1
afin de garantir un
3
.
1
in order to lift the wheels
1
in order to place
3
with the
n
:
oTa
En cas d'utilisation en conditions humides, il est parfois
nécessaire d'escamoter le tasse arrière central du sol afin de
redonner la totalité du report de charge sur le relevage du
tracteur et donc favoriser la traction.
- Retrouver la distance entre axe pour un pré-réglage.
nb:
If using in damp conditions, it is sometimes necessary to
retract the central rear packer away from the ground in or-
der to return all of the load transfer onto the tractor's lifting
mechanism to boost traction.
- Find the centre distance for pre-setting.
FR
2
GB
39

Publicité

Table des Matières
loading

Table des Matières