Microlife BP A130 Mode D'emploi page 10

Microlife BP A130
1 ON/OFF button
2 Display
3 Speaker
4 Cuff Socket
5 Mains Adapter Socket
6 Volume Control
7 Battery Compartment
8 Cuff
9 Cuff Connector
AT M-button (memory)
AK Time Button
Display
AL Date/Time
AM Systolic Value
AN Diastolic Value
AO Pulse Rate
AP Stored Value
AQ Heart Arrhythmia Indicator
AR Battery Display
AS Pulse
BT Traffic Light Display
BK Alarm Time
Read the instructions carefully before using this device.
Type BF applied part
8
Dear Customer,
Your new Microlife blood pressure monitor is a reliable medical
device for taking measurements on the upper arm. It is simple to
use, accurate and comes highly recommended for blood pressure
monitoring in your home. This device was developed in collabora-
tion with physicians and clinical tests carried out prove its
measurement accuracy to be of a very high standard.*
Please read through these instructions carefully so that you under-
stand all functions and safety information. We want you to be happy
with your Microlife product. If you have any questions, problems or
want to order spare parts please contact your local Microlife-
Customer Service. Your dealer or pharmacy will be able to give you
the address of the Microlife dealer in your country. Alternatively, visit
the internet at www.microlife.com where you will find a wealth of
invaluable information on our products.
Stay healthy – Microlife AG!
* This device uses the same measuring technology as the award
winning «BP 3BTO-A» model tested according to the British
Hypertension Society (BHS) protocol.
Table of Contents
1. Important Facts about Blood Pressure and Self-Measurement
• How do I evaluate my blood pressure?
2. Using the Device for the First Time
• Activating the fitted batteries
• Setting the date and time
• Changing the language
• Adjusting the volume
• Selecting the correct cuff
3. Taking a Blood Pressure Measurement using this Device
4. Appearance of the Heart Arrhythmia Indicator for early
Detection
5. Traffic Light Indicator in the Display
6. Data Memory
• Viewing the stored values
• Memory full
• Clearing all values
• How not to store a reading
EN