Water Connection; Water Outlet Accessoires (Optional); Water Inlet Accessoires (Optional) - Salvis FS 1/1 P Instructions D'installation Et Mode D'emploi

4.8 Water connection

- Connect only to cold water which is fit for drinking.
- To be provided on site: water cock and filter
(50 microns), pressure reduction valve and check
valve, installed.
Water pressure
- Mains pressure reduced to 3.5 bar;
- Flow pressure min. 2.2 bar
- If the min. flow pressure is not available, install a
booster pump.
- Prevent a loss of pressure below 2.2 bar by other
consumers!!
Connection for appliances with integrated water
softener device
Hard-water
connection
G 3/4"
G 3/4"
Connection for appliances without integrated water
softener device
Soft-water connection
Hard-water connection
G 3/4"
G 3/4"
Soft-water connection (steam production):
- Soften water to 0° carbonate hardness with means of
reversed osmosis water or self regenerating water
softener plant (ion exchanger).
Hard-water connection (steam condensation) to non
treated mains water:
- Can also be connected to soft water. Use same
connecting set and install tee piece.
Water consumption max:
- FS 1/1 P = approx. 30 l/h (hard and soft water)

4.8.1 Water outlet accessoires (optional)

1 Hose compl.
BI 278583

4.8.2 Water inlet accessoires (optional)

For appliances with integrated water softener device
Hard-water
connection
G 3/4"
G 1/2"
Connection set compl. BI 172449
comprising:
For appliances without integrated water softener
device
Soft-water connection
G 1/2"
Connection set compl. 2 x BI 172449
comprising:
- 31 -
m in. 5 cm
1
2
1 Hose compl.
BI 278583
2 Breather funnel compl.
BI 172448
G 3/4"
1 check valve
1 pressure reduction valve
1 stop cock
Hard-water connection
G 3/4"
G 3/4"
2 check valves
2 pressure reduction valves
2 stop cocks
1
G 1/2"
G 1/2"