Intended Use; Warranty & Liability; Information On Environmental Protection - Titan TP 600 Mode D'emploi

2.1 Intended use

The TP 600 is meant for the strapping of packages, loads on pallets etc.
The TP 600 was developed and constructed for safe operation during strapping
operations; it is exclusively meant for strapping operations with plastic strap.
Unintended use!
Strapping material must not be used for the hoisting of loads; this strapping tool
may only be used as intended (see above).
This tool cannot be used for strapping operations with steel strap.
Standards applied and technical specifications:
(see Declaration of conformity of the machinery)
2.2 Warranty & liability
TITAN Umreifungstechnik GmbH & Co. KG grants a six-month guarantee for all
strapping tools sold by them. That guarantee comprises all defects whose origin
by deficient manufacture or defective material can be evidenced.
Wearing parts are excluded from guarantee!
Warranty and liability claims are excluded if they are caused by one of the following:
Unintended use of the tool.
Unprofessional mounting, commissioning, operation and maintenance of the tool.
Operation of the tool when safety and protective devices are improper.
Disregard of indications in the operating instructions.
Unauthorised structural alteration to the tool.
Missing serial number on the tool and/or its accessories.
Deficient monitoring of tool components being subject to wear.
Unprofessionally performed repair works.

2.3 Information on environmental protection

The tools are manufactured without physical and chemical
substances and such substances being detrimental to health.
Waste disposal requires the meeting of the applicable legal
regulations.
TP 600
H TP 600 EU 37/11
22