Safety Regulations - Titan TP 600 Mode D'emploi

3.

Safety regulations

The disregard of the safety rules below as well as faulty handling
Inform yourself!
Read the operating instructions of
the tool carefully before working
with it.
Protect yourself!
Protect your eyes, face and hands
(gloves
works.
Attention! Strap leaps up!
When cutting the strap hold the
upper part firmly and stand aside.
Attention! The lower part will
leap up.
Exclusively use original TITAN
spare parts!
The use of spare parts not made
by TITAN excludes guarantee and
liability.
Do not exceed air pressure!
max. 6.5
Never
bar
permissible air pressure of 6.5
bar.
The
recommended
tearing strap during tensioning
and poor seal qualities. Only use
the
products!
Work place!
Keep your work place orderly. A
disorderly work place results in
risk of accident. During strapping
operations pay attention that you
stand safely and the equilibrium is
faultless to prevent the risk of
dropping. Never operate the tool
when the working position is
unfavourable!
TP 600
can result in serious injuries.
resisting cuts) during
exceed the
use of strap
can result
relevant TITAN quality
H TP 600 EU 37/11
max.
not
in
Caution: risk of squeezing!
Do not let your fingers get into the
area of the tensioning wheel.
Caution: Exclusively strap
packing items!
During strapping operations no
hands or other parts of the body
must get between
material and packing item.
Attention! Strap may tear!
Strap may tear during tensioning!
Do not stand in the alignment of
the strap.
Use lifting gear only that complies
with the safety regulations.
Do not use gas or compressed
air cylinders!
Do not connect the tool to a gas
or compressed air cylinder.
This tool may only be operated by
staff being instructed as to its use.
Do not hesitate to contact the
TITAN packing advisor in case
of questions.
Maintenance of the tool!
Just a tool in a faultless condition
is a safe tool. Regularly check the
state of your tool for defective or
worn parts. Never work with a tool
which is with defective or worn
parts. Alterations to the tool are
strictly forbidden. The disregard of
that instruction can result in very
serious injuries.
strapping
23