Intended Use; Warranty & Liability; Information On Environmental Protection - Titan HKE-L Notice D'instructions

2.1. Intended use

This tool is made for strapping packages, pallet loads etc. The tool is designed
and manufactured for safe handling during the strapping operation.
This tool is intended for strapping with steel strap material.
Unintended use!
Strapping material must not be used for the hoisting of loads; this strapping
tool may only be used as intended and specified above.
The use of plastic straps is not allowed with this device.
The strapping tool HKE-L complies with the German and European safety
standards and is in accordance with EU Guidelines: see Declaration of
conformity of the machinery.
Standards applied and technical specifications:
See Declaration of conformity of the machinery.
2.2. Warranty & liability
TITAN Umreifungstechnik GmbH & Co. KG guarantees all strapping tools
sold by the company for a period of 6 months. The warranty covers all
defects that can be demonstrated to result from faulty craftsmanship or
defective materials.
Wear parts are excluded from the warranty.
Warranty and liability claims shall be excluded if they are due to one or more of
the following causes:
Misuse of the tool.
Incorrect assembly, commissioning, operation and maintenance of the tool.
Operation of the tool with improper safety and protective devices.
Failure to comply with the information in the operating manual.
Unauthorized structural modifications to the tool.
Insufficient monitoring of tool parts that are subject to wear.
Improper repairs.

2.3. Information on environmental protection

This tool is manufactured without any physical or chemical
substances which could be dangerous to health. For disposal of
all the parts, the governmental instructions must be observed.
HKE-L
H 223 EU 22/11
18 / 47