Intended Use; Tool Description; Instructions On Environmental Protection Notice - Titan HPE-L Notice D'instructions

2.1. Intended use

Proper use of this semi-pneumatic tool includes bundling, collecting and
securing by means of strapping using steel straps. Packed goods such as
section steel, packages of stone, paper, timber, etc. are suitable application
examples.
Unintended use!
Strapping material must not be used for the hoisting of loads, this
strapping tool may only be used as intended and specified above.

2.2. Tool description

The TITAN HPE combines modern TITAN No-Seal-Joint technology with the
advantages of power-saving pneumatics.
The HPE is based on the tried and tested HKE manual strapping tool with the
specially patented locking mechanism developed by TITAN. It reduces the force
required and, compared to conventional tools, prolongs the service life of those
parts which are subjected to mechanical stress.
It has a suspension facility (snap hook) which makes weightless strapping
possible.
The TITAN HPE strapping tool satisfies German and European safety
requirements and complies with the provisions of the following EU Guidelines:
See declaration of conformity of the machinery
Standards applied and technical specifications:
See declaration of conformity of the machinery

2.3. Instructions on environmental Protection Notice

HPE
No hazardous physical or chemical substances are used in
the manufacture of the devices. Comply with the applicable
regulations for disposal.
H 224 EU 21/06
20 / 54