Titan TP 600 Mode D'emploi page 28

To form a seal push push-button 2 one
time, friction welding starts.
After the welding cycle the strap is cut
automatically.
During the welding cycle the cool time indicator
expands out, and after completing the welding
cycle retracts back into the housing.
When the cool time indicator has retracted back
into the housing the seal is complete!
Push push-button 3 for around one second to release the feed wheel tension force.
Pull up the tension motor by means of your right hand and hold it, the strap is now
released and the TP 600 can be swung out of the strap.
TP 600
28
H TP 600 EU 37/11