Layout And Function - Festo 8064284 Brève Description

7 Layout and function

© Festo Didactic 8064398
The motor controller is for use with DC brush motors with
adjustable overcurrent monitoring. A status output indicates
the states "ready for operation" and "error".
External speed selection is made possible by an analog
input. If a voltage of greater than 11.5 V (24 V) is connected
to the analog input, the motor controller's internal speed
setting function is used.
The motor controller offers the following functions:
•
Control of 24 V / 4 A motors
•
Counterclockwise/clockwise rotation
•
Speed control (internal/external)
•
Overcurrent shutdown
•
Short-circuit detection
•
Quick stop
•
Limit switch detection
The motor controller can be mounted on a 35 mm top-hat
rail. The motor controller has a width of 22.5 mm.
DC Motor Controller
25