Notes Concerning Commissioning And Operation - Festo 8064284 Brève Description

DC Motor Controller

6.2 Notes concerning commissioning and operation

• Mortal danger
After switching on, do not touch any voltage conducting parts! The motor controller may only be
operated with safety extra-low voltage!
When operated with extra-low voltage (e.g. from a compensator transformer), injury or death may occur!
•
Maximum operating values
Maximum operating values may not be exceeded.
•
Installation
Installation and commissioning may only be conducted by qualified personnel. All affected components
must be deenergized.
• Commissioning
The motor must be operated without load for initial start-up.
• Fire safety
The module must be mounted on a nonflammable surface.
The module must be protected by a back-up fuse which matches the specified nominal data.
• Applications
The module may only be used for its intended purpose.
Other components must be checked with regard to approvals and applicable regulations.
•
EMC
Motor cables with a length of less than 2 meters do not have to be shielded.
The module may not be operated in a DC electrical system.
The module may only be operated with an approved power pack.
•
Repairs
Repairs may only be conducted by authorized personnel. Unauthorized opening of the module renders
the guarantee null and void and may result in danger for the user and the system.
• Maintenance
The module is laid out for wear-resistant use. Good ventilation must be ensured.
24
© Festo Didactic 8064398