Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 85

8.3 Camera Set

CAMERA SETUP
FLICKER
MIRROR
APERTURE
D ZOOM
WB MODE
PIC FLIP
BLC
D/N MODE
DSS MODE
EXIT
1. CAMERA SET – FLICKERLESS
Flickerless feature is selected between 50Hz and 60Hz. The default setting is OFF. Set
flicker mode ON when power source frequency does not conform to the frequency of video
system (NTSC: 60 Hz / PAL: 50 Hz). The default setting is OFF.
This feature is only necessary whether a PAL camera is used in countries with 60Hz power
source frequency for example.
2. CAMERA SET – MIRROR
This feature mirrors the picture image. Left and right side of picture are inverted when setting
is ON. The default setting is OFF.
3. CAMERA SET – APERTURE
Aperture enhances picture detail by increasing gain of the camera and sharpening the edges
in the picture. The default seeting is 10 (the aperture level is adjustable from 01 ~ 15).
4. CAMERA SET – DIGITAL ZOOM
Move joystick rightwards in order to set ON, whether you want to activate digital zoom. The
default setting is OFF.
5. CAMERA SET – WB MODE
4 different white balance modes for varied conditions of vicinity illumination are available.
The default setting is AWB and it is possibly to change the mode option according to the
lighting conditions as below:
AWB Mode – 3,200°K to 6, 000°K (Default)
Indoor – up to 3,200°K
Outdoor – up to 5,800°K
ATW Mode – 2,000°K to 10, 000°K
: OFF
: OFF
: 10
: OFF
: AWB MODE
: OFF
: OFF
: AUTO
: OFF
70
DEFAULT SETTING

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tvcc75200

Table des Matières