Error Codes - JAC VARIA Mode D'emploi

11 ERROR CODES

Flashes or code displayed on
screen
Should the problem persist, please contact your technician.
English
Problem description
Cover or door open
Electric circuit fault
Variable speed drive fault
Claw fault
Object in front of the cutting
channel sensor
Linear fault
Carriage return timeout
16
Action
Close the crumb tray door and/or top cover
and/or clean the lock.
Please switch the machine off using the main
switch (fig.2, n°12) and on again after 30
seconds. Should the problem persist, please
contact your technician.
Please switch the machine off using the main
switch (fig.2, n°12) and on again after 30
seconds. Should the problem persist, please
contact your technician.
Please ensure that there is no object or dust
interfering with the loaf-holding claw.
Please remove any object in the vicinity of
the blade aperture channel and position the
loaf at the bottom on the right-hand side of
the infeed table.
Check that the carriage track is clear.