Start-Up; Switching Swivel Spots On / Off; Replacing Batteries - LIVARNO LUX HG00092A Instructions De Montage, D'utilisation Et Consignes De Sécurité

Pull the two insulating strips out of the two battery compartments to
activate.

Start-up

For both model HG00092A and HG00092B, the swivel spotlights
can be tilted approx. 45° in any direction (see Fig. A or B).

Switching swivel spots on / off

The LED light
1
has three settings:
Press on / off switch once: high light output.
Press on / off switch again: low light output.
Press the on / off switch again: turns the light off.

Replacing batteries

Slide the mounting plate
two battery compartments at the rear centre of the LED light (see
Fig. F).
Press the handle on the battery compartment slightly toward the
compartment and lift the battery compartment cover
battery compartment.
Insert batteries in the compartment as indicated.
Replace the battery cover to close the battery compartment.
Apply light pressure until the handle locks in again.
is controlled using the On / Off switch
and remove from the bracket. There are
7
2
. This button
3
to open the
4
GB/IE 19